Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > Blogs
Register Blogs FAQ Calendar Mark Forums Read

Notices

Old
Rating: 3 votes, 5.00 average.

ProfiLux Remote Access

Posted 05/16/2011 at 05:45 PM by snorvich (System configuration and fish for my two tanks)
Updated 05/19/2011 at 03:11 PM by snorvich
Tags profilux

Quote:
Originally Posted by Pro_Reef View Post
Setting up your Profilux for remote log in isn't "too" complicated, but does require a little familiarity with your router.

First off you need to determine what the IP address of your profilux is. The simplest way to do this is to manually configure your Profilux with a static IP address. In the Profilux Software you do this as follows:

1.) connect to your Profilux using the Profilux Control Software
2.) Click on the "System" section of
...
snorvich's Avatar
Team RC member
Posted in Profilux
Views 12098 Comments 0 snorvich is offline Edit Tags
Old

GHL Dosing

Posted 05/07/2011 at 02:36 PM by snorvich (System configuration and fish for my two tanks)
Updated 05/19/2011 at 03:12 PM by snorvich
Tags profilux

Ok here we go the rest of the guide

So before we can even start talking about setting up dose rates and anything else we need to program the doser. (if you are reading this on the FM forum, I hope this info helps you also)

For slave dosers with the profiLux

This is where the profiLux shines above all other controllers, as you know GHL make a slave doser that works in unison with the controller, this gives the unique feature that you can dose in controlled...
snorvich's Avatar
Team RC member
Posted in Profilux
Views 8903 Comments 0 snorvich is offline Edit Tags
Old

Profilux control of Tunze

Posted 05/04/2011 at 07:12 PM by snorvich (System configuration and fish for my two tanks)
Updated 05/19/2011 at 03:13 PM by snorvich
Tags profilux

Quote:
Originally Posted by chem-e View Post
I'm using two Tunze 6055 and an MP40 on my tank, but I use sequence 1 with 30% min to 80% max, off at night (only MP40 on night mode does the job), and 80% for storms (not that I use it).

Here's the info I got off the manual and I think this is one of the few sections that I find useful.

Hopefully, this is helpful.

6.5.2.1 Operational mode
Off – the pumps of this group are permanently off.
Permanent – the pumps are permanently active and
...
snorvich's Avatar
Team RC member
Posted in Profilux
Views 8250 Comments 0 snorvich is offline Edit Tags
Old

Requesting help with PAB

Posted 04/27/2011 at 08:09 PM by snorvich (System configuration and fish for my two tanks)
Updated 05/19/2011 at 03:14 PM by snorvich
Tags profilux

IF you have PAB power bars they do not plug into S1S4, they plug into PAB ports. On the back of your profilux you have two PAB ports and on the power bar there is a PAB port, the cable (RJ45 which is standard cat5e cable) plugs into this.

From the very first part of the manual
http://support.aquariumcomputer.com/...n_PAB_V500.pdf

"1 Connection
Devices with ProfiLux Aquatic Bus – in short PAB – are connected to the corresponding RJ45...
snorvich's Avatar
Team RC member
Posted in Profilux
Views 5967 Comments 0 snorvich is offline Edit Tags
Old

Assistance with wireless connection of P3e

Posted 04/27/2011 at 08:06 PM by snorvich (System configuration and fish for my two tanks)
Updated 05/19/2011 at 03:15 PM by snorvich
Tags profilux

Quote:
Originally Posted by tonyf View Post
Me again.

So now I have consumed my entire Sunday morning attempting to coax the P3e to connect wirelessly to PLC 5.0.4.2. I am not kidding when I tell you that I have been through the process 10 times, repeating it slavishly as set out in GHL’s instructions (W)LAN instructions and Boboxx’s notes in his post above.

Just to run through the network hardware again:
(1) Wireless router – Netgear N300 Model WNR200v2
(2) Wireless adaptor – Netgear Universal
...
snorvich's Avatar
Team RC member
Posted in Profilux
Views 6707 Comments 0 snorvich is offline Edit Tags

All times are GMT -6. The time now is 02:29 AM.


TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2020 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2014
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.