Reef Central Online Community

Go Back   Reef Central Online Community > Blogs > Spaced Cowboy
Blogs FAQ Calendar Mark Forums Read

Notices

Rate this Entry

PAR for the course

Posted 06/29/2012 at 09:33 PM by Spaced Cowboy
Tags build

So having gone with the AI Sols, I wanted to see how well they were lighting the tank. The goal was always to have darker areas and more well-lit areas, I didn't want to blast everything in the tank with bright light, I wanted something that looked a little more natural.

So I started looking around for PAR meters - there's a couple of DIY projects but nothing calibrated and "ready to go", so I caved and looked at the professional ones. Apogee's meters seem to be the normal ones used, but after tax they were coming out at $400 or so. However... I noticed that they're calibrated to 5.0 µmol m^-2 s^-1 per mV, which means you just need to connect them up to a multimeter that reads millivolts accurately, and multiply by 5 to get the PAR rating. Excellent - the sensors are a lot cheaper than the full-blown meter, so that's the way I went.

Here's the results:
[IMG]http://0x0000ff.com/imgs/fishtank/par.JPG[/IMG]

Sorry for the large image, it's a wide tank Just below the water-level and in the center of the tank, it's at 960 PAR, which is pretty good Some of the numbers look a bit weird, but they're more to-do with the fact that it's hard to get a sense of depth from the photo, and if the reading is towards the front or back of the tank, it's much lower than it looks like it ought to be in 2D.

So, I guess the question is: is that good enough ? There seem to be areas that are good, but my gut feeling is that a bit more might be useful. There's another 2 AI units sitting in the shed and I could slot them into the support bar easily enough... That's just a gut feeling though, I don't really know what PAR I need, in order to keep corals... Anyone got any suggestions ?

BTW, the support beam isn't bending, it's an artifact that came in when I straightened the photo to make the tank look level. I'm not a great photographer
Posted in Uncategorized
Views 41859 Comments 4 Edit Tags Email Blog Entry
« Prev     Main     Next »
Total Comments 4

Comments

  1. New Comment
    What are your tank's dimensions?
    Posted 07/05/2012 at 09:57 PM by TheFishTeen TheFishTeen is offline
  2. New Comment
    IridescentLily's Avatar
    Here's Sanjay Joshi's site. He's a well respected Phd lighting guru, who is in the reef hobby. He created a par calculator. He literally tested all metal halide hqi bulbs on the market.
    I have a feeling you've a great amount of par, but you should take a look to make sure
    http://www.manhattanreefs.com/lighting
    Here's some LED tests (note that the maximum par with 130 watts of led is 550.
    http://marine-engineers.org/2012/01/...g-interpreted/
    Posted 07/06/2012 at 06:00 PM by IridescentLily IridescentLily is offline
  3. New Comment
    Spaced Cowboy's Avatar
    Quote:
    Originally Posted by TheFishTeen View Comment
    What are your tank's dimensions?
    The tank is 8' by 2' by 2', and there's only 3 of the AI blues suspended about 12" off the top of the water surface, arranged lengthwise (so the longer parts of the Sols are parallel to the longer side of the tank) down the tank.
    Posted 07/18/2012 at 06:39 PM by Spaced Cowboy Spaced Cowboy is offline
  4. New Comment
    Spaced Cowboy's Avatar
    Quote:
    Originally Posted by IridescentLily View Comment
    Here's Sanjay Joshi's site. He's a well respected Phd lighting guru, who is in the reef hobby. He created a par calculator. He literally tested all metal halide hqi bulbs on the market.
    I have a feeling you've a great amount of par, but you should take a look to make sure
    http://www.manhattanreefs.com/lighting
    Here's some LED tests (note that the maximum par with 130 watts of led is 550.
    http://marine-engineers.org/2012/01/...g-interpreted/
    Thanks very much - I'll take a look

    I've actually just sold the two SOL whites I had hanging around, so there's some spare cash for lighting burning a hole in my pocket

    Cheers
    Simon
    Posted 07/18/2012 at 06:41 PM by Spaced Cowboy Spaced Cowboy is offline
 

All times are GMT -6. The time now is 03:47 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.