Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > Blogs > chimmike
Register Blogs FAQ Calendar Mark Forums Read

Notices

Rate this Entry

Intro to 100g cube build

Posted 07/31/2010 at 03:24 PM by chimmike

Welp, I've already started the process somewhat, but here's what the plan is, followed by where I am in the process:

Plan:
100g cube, lit by custom LED's (Cree LED's)
3 heatsinks with royal blues and whites.
Controller (leaning towards RKE)
Skimmer
75g refugium/Sump
Reeflo external return
2x Vortech MP40w's

Process:
I've got the upper and lower frames for the oversize stand assembled of 2x6's. Lower frame has the ply sunk in and sealed with kilz and silicone, creating a sort of "tub", where the sump tank will sit. This is to help prevent any overflows from going all over my laminate wood floor. It'll hold a few gallons before spilling out of the wood.

Upper frame will have 3/4" plywood as well as styrofoam cut to the exact dimensions of the tank (36x37x18)

Verticals are 2x4's with kreg pocket holes.

It will be skinned, but with what I am not sure.

Overflow: internal coast to coast with beananimal's silent overflow, 1" bulkheads, 1.5" piping.

Plumbing: I have numerous fittings and what not left over from my previous tank, however since most of the return plumbing and drain will be 1.5", the only things I'll be using are most likely my 1" bulkheads.
I'll feed the reeflo pump from the sump with two 1" bulkheads in the 75g (with screen covers over the inlets). I'll make extensive use of spa-flex or the like to keep vibration sound and plumbing ease to a minimum. The return pump will sit on the other side of the wall in my garage for noise purposes.

I'm still not sure if I'll do over-the-top returns (two) from the pump or if I'll drill a couple bulkheads in. I'm not sure if I want to drill the pane 5 times, but aesthetic wise, I'm not sure I want two return lines sticking up over the rim on a rimless tank.
Posted in Uncategorized
Views 9228 Comments 3 Edit Tags Email Blog Entry
« Prev     Main     Next »
Total Comments 3

Comments

  1. Old Comment
    Mmckibben's Avatar
    I like your set up. I have the same thing just in a smaller size.
    Posted 08/01/2010 at 10:07 PM by Mmckibben Mmckibben is offline
  2. Old Comment
    chimmike's Avatar
    thanks!
    Posted 08/02/2010 at 10:53 AM by chimmike chimmike is offline
  3. Old Comment
    Korrine's Avatar
    any pictures now?
    Posted 01/05/2011 at 11:36 AM by Korrine Korrine is offline
 

All times are GMT -6. The time now is 06:47 AM.


TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2018 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright 1999-2014
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.