Pump oscillation help please
I acquired a second DC8. I want the PH's on the right side to alternate opposite the PH's on the left side.
Right PH's on the right on for 15 minutes (Left PH's off). Then the left side for 15 minutes (Right PH's off). If I program my AC3 with the info below all pumps are on/off for 15 minutes, then they all go off and stay off: OSC 015/015 ON/OFF Then PM1 ON OSC 015/015 ON/OFF Then PM2 ON OSC 015/015 ON/OFF Then PM3 ON OSC 015/015 ON/OFF Then PM4 ON If I program my AC3 with this data my left side only comes on and stays on. OSC 015/015 ON/OFF Then PM1 ON If Timer PM1 = On Then PM3 OFF If Timer PM1= Off Then PM3 On OSC 015/015 ON/OFF Then PM2 ON If Timer PM2 = On Then PM4 OFF If Timer PM2 = Off Then PM4 On OSC 015/015 ON/OFF Then PM3 ON If Timer PM3 = On Then PM1 OFF If Timer PM3 = Off Then PM1 On OSC 015/015 ON/OFF Then PM4 ON If Timer PM4 = On Then PM2 OFF If Timer PM4 = Off Then PM2 On To say the least I'm a little confused Dave- |
I ran this through the simulator and it works fine. However in real time the pumps do not switch.
If Time > 13:30 Then MH1 ON If Time > 21:30 Then MH1 OFF If Time > 14:00 Then MH2 ON If Time > 22:00 Then MH2 OFF If Time > 13:15 Then T5A ON If Time > 22:15 Then T5A OFF If Time > 22:15 Then MLT ON If Time > 23:59 Then MLT OFF If Time > 21:15 Then FUG ON If Time > 14:30 Then FUG OFF If Temp > 78.5 Then FAN ON If Temp < 78.0 Then FAN OFF If Temp < 77.5 Then HT1 ON If Temp > 78.0 Then HT1 OFF If Temp < 77.5 Then HT2 ON If Temp > 78.0 Then HT2 OFF If Temp > 81.0 Then MH1 OFF If Temp > 81.5 Then MH2 OFF If Power 015 Then MH1 OFF If Power 015 Then MH2 OFF If Power 015 Then SKM OFF If Power 015 Then WMK OFF If Power 000 Then ALM ON If Time > 00:00 Then ALM OFF Max Change 030 M Then MH1 OFF Max Change 030 M Then MH2 OFF Max Change 030 M Then SKM OFF Max Change 030 M Then WMK OFF If Temp < 75.9 Then ALM ON If Temp > 81.9 Then ALM ON If Time > 00:00 Then RET ON If Time > 00:00 Then SKM ON If Time > 00:00 Then WMK ON If Time > 00:00 Then ATO ON If FeedA 000 Then RET OFF If FeedA 005 Then SKM OFF If FeedA 000 Then PM1 OFF If FeedA 000 Then PM2 OFF If FeedA 000 Then PM3 OFF If FeedA 000 Then PM4 OFF If FeedA 005 Then WMK OFF If FeedA 000 Then ATO OFF If FeedB 000 Then RET OFF If FeedB 005 Then SKM OFF If FeedB 000 Then PM1 OFF If FeedB 000 Then PM2 OFF If FeedB 000 Then PM3 OFF If FeedB 000 Then PM4 OFF If FeedB 005 Then WMK OFF If FeedB 000 Then ATO OFF If FeedB 005 Then SKM OFF OSC 005/005 ON/OFF Then PM1 ON If Timer PM1 = ON Then PM3 OFF If Timer PM1 = OFF Then PM3 ON OSC 005/005 ON/OFF Then PM2 ON If Timer PM2 = ON Then PM4 OFF If Timer PM2 = OFF Then PM4 ON OSC 005/005 ON/OFF Then PM3 ON If Timer PM3 = ON Then PM1 OFF If Timer PM3 = OFF Then PM1 ON OSC 005/005 ON/OFF Then PM4 ON If Timer PM4 = ON Then PM2 OFF If Timer PM4 = OFF Then PM2 ON |
WOW 49 views and no help :(
|
Really 61 views and still no help. . .
|
You're overthinking it ;)
Try this: OSC 015/015 ON/OFF Then PM1 ON If Timer PM1 = ON Then PM2 ON If Timer PM1 = OFF Then PM2 OFF If Timer PM1 = ON Then PM3 OFF If Timer PM1 = OFF Then PM3 ON If Timer PM1 = ON Then PM4 OFF If Timer PM1 = OFF Then PM4 ON This is as simple as you can do it - by making 1 pump the "master" and having the state of each of the other pumps spend directly on the state of the master. PM2 will do exactly what PM1 is doing. PM3 & 4 will do exactly the opposite of PM1. |
Quote:
My apoligize to the forum for being such an a$$. Fustration was setting in and I knew you folks had the answers! |
All times are GMT -6. The time now is 03:33 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by
Advanced User Tagging v3.3.0 (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.