Is it ok to use a 1/4 flush cut bit to route the teeth in overflow? Im doing it calfo style so i dont want to make a mistake like using wrong bit. bit has two blades on it not three
__________________
" If you can touch people with wildlife, then they want to save it." Steve Irwin
Current Tank Info: One of my tanks is a 50 gallon Mini Reef - 250 wt 20k on a PFO mag. ballast - a 250 wt krystal star 11k on a dynamic E-ballast - ASM G2 1/2 skimmer -TLF phosban reactor with 1 1/2 carbon in it -
|