The Self Test feature of the AquaController performs a short diagnostic on the major internal components in
the base unit. If the Self Test is selected and the unit is operating correctly, a "passed" message is displayed on the
screen. The other information displayed indicates the date and revision of the AquaController III firmware as
well as the controller's serial number.
It also has a feature for Memory initialization, this will reset the calibration constants (for the probes) to the factory condition and to the original default basic program.
__________________
Did I write what I wrote? What the heck am I talking about! Well..... Nevermind.
Current Tank Info: 225 gal reef, DSB, 40 g sump w/ LRT100 return, 37 g pre-sump, 3 MH 250 W 15K, 4 96 W PC dual actinic,ETS 1500 Skim.w/LRT70, 20 lb Ca R., 40 W UV, 1/3 HP chiller, two 350 W Htrs, Neptune II Cont., 330 P LR/ 330 P LS. 55 gal Refugium
|