Yes I can set 0-5v. I have the dimming expansion that has different settings in it if you open the box. Right now, it's set for 0-5v PWM.
I hope this is everything your looking for;
Power source:
Mean Well MW 24V 14.6A 350W AC/DC Switching Power Supply NES-350-24 UL PSU
Edit: this PS did not come from Steve's. The first PS that was sent with my kit was doa. They sent another right away, and it died within 2 months. Both were off brand junk, so I purchased a mean well from ebay that had the same specs that came with the kit.
Luxeon ES Royal Blue 3 watt LED's
Forward voltage is 3.00V @ 1,000mA
Drivers are @ 1000mA
Right now (the ones that don't work) are set up in arrays of 7, 3 of these arrays are on this "triple driver". (So currently 21 of my leds don't work)
Thank you for your help, please let me know if you need any more information. I've wasted so much time with Steve's "support", my corals are starting to look unhappy. So I'm sure they'll thank you as well!!
Last edited by rob.mwpropane; 10/08/2017 at 07:22 AM.
|