Reef Central Online Community - View Single Post - DIY- "Pins" method of gluing acrylic.

mflamb · 09/05/2006, 04:05 PM

Makes perfect sense. My stand is 40". It's in my billiards room where all the chairs are tall barstools, so viewing height is higher than normal. I figured with the extra room I would add height to the sump. The skimmer is external. I think I will reduce the length and add a taller box at one end for the top off water. Thanks again for the continued guidance. I will start a thread soon in the LARGE section and try to finalize my plumbing/sump/pumps setup.

09/05/2006, 04:05 PM	#262
mflamb Registered Member Join Date: Jun 2006 Location: Pasadena, Texas Posts: 8,422	Makes perfect sense. My stand is 40". It's in my billiards room where all the chairs are tall barstools, so viewing height is higher than normal. I figured with the extra room I would add height to the sump. The skimmer is external. I think I will reduce the length and add a taller box at one end for the top off water. Thanks again for the continued guidance. I will start a thread soon in the LARGE section and try to finalize my plumbing/sump/pumps setup. __________________ Click on my red house to see my 390 and 300 build thread. Those are my last 2 tanks in Tampa. Now in Pasadena waiting to buy a house to set up my next tank....anemones and clowns...probably a 3x3 150 gallon.