Reef Central Online Community - View Single Post - In-wall 380gal tank

karimwassef · 08/03/2014, 12:27 PM

I made two of my own injectors with 1" penductors in a 2" PVC housing and a 1/2" air inlet.

They generate gallons of air. I put the expel hose into a bucket in my sink. The wet skimmate filled it and the air was being pushed out through the water so I could see how much was being injected.

I glued the acrylic with acrylic solvent.

08/03/2014, 12:27 PM	#303
karimwassef Registered Member Join Date: May 2004 Location: Dallas, TX Posts: 11,033	I made two of my own injectors with 1" penductors in a 2" PVC housing and a 1/2" air inlet. They generate gallons of air. I put the expel hose into a bucket in my sink. The wet skimmate filled it and the air was being pushed out through the water so I could see how much was being injected. I glued the acrylic with acrylic solvent. Last edited by karimwassef; 08/03/2014 at 12:37 PM.