Reef Central Online Community - View Single Post

scott11106 · 11/11/2017, 07:29 PM

Hello all,

I started a thread in the "new to hobby" section but figured this would be a better place to start the full build thread. I will post some of the original drawings ect and then start the current build information.

A bit of background, I had a 90 gallon salt water reef tank many years ago and cut my teeth on that with the only automation being a couple timers and a few float valves so everything was done manual.

this time i am building a 400 gallon 7'x3'x2' tall built in tank with a full fish room behind it (14'x8').

Please let me know if anyone has any ideas or suggestions as i am going to be new to hobby again and alot has changed in the 15 years that i have been away......

11/11/2017, 07:29 PM	#1
scott11106 Registered Member Join Date: Mar 2017 Location: Fletcher, NC Posts: 70	NEW 400 gallon in wall build NC Hello all, I started a thread in the "new to hobby" section but figured this would be a better place to start the full build thread. I will post some of the original drawings ect and then start the current build information. A bit of background, I had a 90 gallon salt water reef tank many years ago and cut my teeth on that with the only automation being a couple timers and a few float valves so everything was done manual. this time i am building a 400 gallon 7'x3'x2' tall built in tank with a full fish room behind it (14'x8'). Please let me know if anyone has any ideas or suggestions as i am going to be new to hobby again and alot has changed in the 15 years that i have been away......