HALF FULL!
Here is the plumbing so far. I still have to finish gluing the lower part of the drains (thus the reason u can see some unpainted portions. I also still need to plumb the Rollermat and reactors into the return manifold. I decided to run pretty much everything from the return, at least for now.
Calcium reactor also needs a home, and I am hoping to find room for a ATS. I may have to build a narrow one to fit in the middle sump chamber. I plan to keep the Rollermat external and put that on a stand next to/ over the drain section.
Sent from my Nexus 6 using Tapatalk