She’s filled! A fellow Reefer made me some MP40QD extension cables so the dryside wires + extensions can reach my controller cabinet. It’s a wonderfully simple plug and play solution.
Unfortunately though, one of my MP40QD wetsides had a hairline crack in the plastic and a swelled magnet.
Knew it was sketchy when I turned on the pump and the wetside flew off the glass. Upon further inspection the prop was very stiff and almost stuck to the shaft because of the slight magnet swelling. See the 3 hairline cracks? New wetside should be here by Friday.
Slowly adding more salt until I hit 1.025, currently at 1.022. Once it gets there, I’ll add my cured Pukani.