Quote:
Originally Posted by BigDave
I use the OM wavemaker too.
My inlet pulls from the lower middle of the tank.
My 4 outlets are at the top... one in each corner and then two in the middle like below:
1 2 3 4
| | | |
\ / \ /
I use 45º outputs so that the outlets point down and across the tank. 2 in one direction, 2 in the other. This gives me a good rolling current one direction that then switches to a rolling current in the other.
This is on a smaller 120 gallon Cube.
|
My inlets are going to be in back wall of the tank.
I'm not sure how you are describing your outlets.
_______________
|1 2|
| |
|3 4|
| |
| |
|______________|
This looks like crap. Not sure if you can figure out what
I meant.
I think, after rereading I know what you mean. There are 4 outlets across the back wall of your tank alternating facing left and right (at 45degrees)
Like that?
Or do you have an outlet in each corner?
__________________
Intelligence is knowing that a tomato is a fruit. Wisdom is knowing not to put it in a fruit salad
Current Tank Info: 75g mixed reef
Last edited by DougSupreme; 06/13/2018 at 02:51 PM.
Reason: Layout
|