Quote:
Originally Posted by dabob79
I am. I could have made it about a 1/4 inch longer so I wouldn’t have to put all that two-sided tape on top of it, I may do that someday. For now it works great so I’m not messing with it lol
Sent from my iPhone using Tapatalk
|
I went with a longer tube for the main body, and then fashioned an extension for the clip that holds it to the divider. I get about the same amount of height, but obviously I block more flow over the weir. On the plus side, my skimmate cup still sits flat on top of the black plastic top piece.
I get different amounts and consistencies depending on:
1. What I feed that day.
2. How much I stir up the sand/blow off the rocks.
3. How old my airstone is (I usually put a new one in monthly. I dry out the old ones and then take a rasp to them to clean them up. The "reconditioned ones seem to work as good or better than the new ones).
4. And obviously how I adjust the bubbles.
I've even had so much foam in the cup that it has pushed the top off. And I empty once a day concurrent to feeding and water change (I do a half gallon every day- keeps things very stable and fish and coral seem to like it that way).
Sent from my XT1710-02 using Tapatalk