Quote:
Originally Posted by FLSharkvictim
Here is the equipment that I use in order to do an Automatic water changes.
Also, during these water changes you never have to turn any skimmer off or any pumps off while doing a water change with the DOS.
Equipment List:
Neptune DOS
Neptune 30FT Tubing or more.
1 EB8 Power Strip
PM2 Module for your salinity w/ Probe
InkBird Temp gauge controller
50ft AquaBus Cable that will connects to your Apex panel which us under my tank.
2 or 3 port TUBE Holder
Stepper Bit from Home depot
Acrylic Rod 12'' qty 2
TIMER - To kick on the pump to mix the salt 5 times a day for 30 minutes.
Above my mixing station, I have mounted a pcs of plywood right above. It has the 6 stage RODI, Booster Pump, EB8 power Strip, PM2 module, Salinity Probe, InkBird Temp Controller, PX40 PANWORLD WATER PUMP mixing my salt on the Mixing Station. Also, I have the options to put on the Banjo fittings if I want to do fast and large water changes or if I need some Fresh RO water I can pump it out at any time.
|
Can we get some more pictures of this setup? Or we can talk in PMs if you want.
Sent from my iPhone using Tapatalk