Reef Central Online Community - View Single Post - My DIY Netduino Controller and Multi-channel Multi-chip LED Cannons

nkd5024 · 01/03/2013, 12:09 AM

I am currently building a similar project but using the arduino. It will be interesting to see which way you go with hardware/software.

As was recommended to me, the etape liquid level sensor isn't the best thing to use for aquariums. I bought one and tested it out and quickly realized that it is quite sensitive to any movement or twisting/bending of the sensor. It was recommended I try out a pressure sensor. It only cost $14 and after some testing I've done it seems to be a lot more consistent in its readings. Heres a link if your interested. http://www.digikey.com/product-detai...GC7U-ND/951844

01/03/2013, 12:09 AM	#7
nkd5024 Registered Member Join Date: Sep 2010 Location: SE Pennsylvania Posts: 363	I am currently building a similar project but using the arduino. It will be interesting to see which way you go with hardware/software. As was recommended to me, the etape liquid level sensor isn't the best thing to use for aquariums. I bought one and tested it out and quickly realized that it is quite sensitive to any movement or twisting/bending of the sensor. It was recommended I try out a pressure sensor. It only cost $14 and after some testing I've done it seems to be a lot more consistent in its readings. Heres a link if your interested. http://www.digikey.com/product-detai...GC7U-ND/951844 __________________ "The most incomprehensible thing about the universe is that it is comprehensible." -Albert Einstein Check out the Okeanos Reef Controllers Facebook Page at www.facebook.com/OkeanosReef Current Tank Info: 75 Gallon Mixed Reef, and 6 Gallon JBJ Nano