|
Hello and thank you for all of this wonderful information. I am about 12 hours into my tub and have a foolish noob question. Where do you measure the salinity at? I'm set up with 80 lbs in a 32 or 34 gal brute garbage can. I've got my sump pump on bottom with a hose on the outlet blasting water at the top and a power head midway down, each about 1/3 of the way around the bin. I do have a used sump and line and failed to rinse it. If I measure the salinity at the top or about 2/3 of the way down I get one reading but if I measure it from what's coming out of the hose I get a much higher reading. Reading right where the water comes out rather than blasting water into the hygrometer gave me the same reading as the rest of the tub. Any thoughts? Thank you again.
|