Ok, currently running 200 watts at max settings with my LEDs (and the fans and driver... too lazy to plug each one into a KAW meter). So that's a little over 4 amps when it's at max power, which at current ramping settings is about 6 hours a day. Cord feels fine, not warm at all, so I'm happy with it for now.
Little more comfortable with the fact that the connectors are those screw together water tight connectors, my first run through with this quite a few years back I was using brass connector plates with copper wiring, galvanized screws and completely ignoring the whole galvanic corrosion issue... little more on top of things now. But glad to know it can handle the current.
__________________
Mike
|