|
The code I put out is how I use the controller for my own requirement. You will/must modify the code according to your requirement using my code as the starting point.
If you can understand the format I used to program the outlets in config.h, that is where you edit the outlet names, functions, schedule, etc. I can describe the format if needed.
I'm thinking of getting a jebao wp-25 and use the pwm to control the pump. The wp-25 takes 5v pwm so the op-amp in my connection diagram is not needed. The plan is to still use the signal from the jebao controller as is by passing through the signal with the option to override the signal, say to activate feed mode from the iPhone instead of having to manually press the feed button on the jebao controller.
|