Could someone read through this and make suggestions/corrections?
I have a small aquarium, 29 gal biocube with just 1 6055.
My goal is for the flow to randomize with strong action in the day and to be calmer in the evening I am also using the sunrise and sunset function on lighting. Currently I am using the stock lighting that came with the biocube but plan on upgradeing to LED in the future
Name PF_Day
Type pump
Initial time off 0
On time 4
Off time 4
Min intensity 30
Max intensity 100
Name PF_Nite
Type pump
Initial off time 0
On time 30
Off time 5
Min intensity 30
Max intensity 45
Device 3_1
Name Actinic
Fallback OFF
Set OFF
If Sun 000/000 Then ON
If Tmp > 80.0 Then OFF
Min Time 001:00 Then OFF
Device base_Vari1
Name Tunze_6055
If Output Actinic = ON Then PF_day
If Output Actinic = OFF Then PF_night
If FeedA 000 Then OFF
I have to say, I do not like GUIs for programming, I much prefer CLI. The learning curve is steeper but it's a lot easier once you get it under your belt.
__________________
Originally posted by yellowslayer13:
"I hate that hole"
Current Tank Info: SCMAS Member 225 peninsula euroreef RS180 Apex 400W X 3 20k radiums / Spectra mixed SPS
Last edited by five.five-six; 08/08/2017 at 04:44 AM.
|