04/21/2017, 06:36 AM
|
#2168
|
|
Registered Member
Join Date: May 2012
Location: Southern California
Posts: 313
|
Quote:
Originally Posted by BigDave
I ended up using wood.
I used 1x material and faced both sides with 1/4" plywood. I filled the void with structural foam. I then embedded 1" magnets along the top edge of each panel. All 3 sides are held on with just the magnets. This allows me to pull all three sides off of the stand when I need to work on the equipment.
|
Can we get a picture?
|
|
|