Reef Central Online Community - View Single Post - Custom Cabinet for 90g Reef (Build Thread)

RedEDGE2k1 · 10/08/2007, 08:37 AM

The front panel butts up to the side panels. The cut edge of the side panels will be covered later by fluted columns.

The back panel has cut-outs to reduce weight.

The "floor" panels sit an inch or two above the bottom of the cabinet, to help with leveling issues later. I will add 3/4"x3/4" strips under the center floor panel, to prevent the panel from bowing under the weight of the sump.

10/08/2007, 08:37 AM	#20
RedEDGE2k1 Registered Member Join Date: Dec 2004 Location: Atlanta, GA Posts: 710	The front panel butts up to the side panels. The cut edge of the side panels will be covered later by fluted columns. The back panel has cut-outs to reduce weight. The "floor" panels sit an inch or two above the bottom of the cabinet, to help with leveling issues later. I will add 3/4"x3/4" strips under the center floor panel, to prevent the panel from bowing under the weight of the sump. Last edited by cward; 08/05/2008 at 06:57 PM.