Reef Central Online Community - View Single Post

Lord,Darth Bane · 09/22/2017, 06:58 AM

Hi Roger. Need some helps.

So I have just purchased two 6095 pumps and a 7092.300 cable.

I have connected them with the cable, set the child pump to "external control" mode and use the controller of the parent pump to run them.

Both controllers are set at "main power" 100%, "pulse" at center, and "pulse power" off. I have no problem running them at "pulse 2-10s" or "auto adjust wave". And I also have no problem switching them between inverse and parallel operation by pressing the "food timer" for 5 seconds.

The problem is when I want to set them running between 30-100%, I turn up the "pulse power" of the parent controller from off to 30%, the parent pump is OK running between 30-100% but the child pump always stays at 100%. The child pump only reacts when the "pulse power" is off then the child pump is totally off.

How to set both pumps running between 30-100%?

Thanks.

09/22/2017, 06:58 AM	#1
Lord,Darth Bane Registered Member Join Date: Sep 2007 Posts: 69	Problem connecting two 6095. Hi Roger. Need some helps. So I have just purchased two 6095 pumps and a 7092.300 cable. I have connected them with the cable, set the child pump to "external control" mode and use the controller of the parent pump to run them. Both controllers are set at "main power" 100%, "pulse" at center, and "pulse power" off. I have no problem running them at "pulse 2-10s" or "auto adjust wave". And I also have no problem switching them between inverse and parallel operation by pressing the "food timer" for 5 seconds. The problem is when I want to set them running between 30-100%, I turn up the "pulse power" of the parent controller from off to 30%, the parent pump is OK running between 30-100% but the child pump always stays at 100%. The child pump only reacts when the "pulse power" is off then the child pump is totally off. How to set both pumps running between 30-100%? Thanks.