|
After checking for leaks there were quite a few noted between baffles. The welding of acrylic is much trickier then I thought it would be. I purchased some Weldon 16 and cut 1/4" dowls. I then glued/welded these in each of the corners. I am happy to say using the Weldon 16 is much easier then the Weldon 3.
For anyone looking to do this. With the weldon 16 you really need to get the right pressure. Too much pressure and all the glue gets pushed out. To little pressure and there is too much glue in the joint and when the glue evaporates it leaves air pockets. If you can use clamps that are gently nudged tight this works the best. The glue does fill in wider gaps easily.
|