Quote:
Originally Posted by VanJuKy
I received this back from Ozotech this morning.
"When using an air pump with this system you should connect the outlet of the desiccant air drier to the inlet of the air pump and the out let of the air pump to the inlet of the ozone generator. And do not allow the pumping pressure to be any greater than 2 PSI."
I will look for the quietest pump I can find and do the same thing you said. The Ehiem pumps are supposed to be very quiet. Even have a built in hook for hanging. I might glue a piece of acrylic with a barbed fitting over the intake of the pump (which is on the underside and about the size of a coin) . I will post a pic when done. I will then put a small regulator. as well as a gauge, on the output so that I keep within 2PSI.
|
My air pumps don't have inlet ports.
Just a dime sized hole underneath with some kind of white filter membrane.