|
i read those but i am still confused what the pins are for?are they top hold the 2 pieces in place?it says 1 pin every 6 inches but if you are doing a small sump could you do more?also once the top of the sump is glued on (so it looks like a box) how do you route it so it looks like it has "trim" work on the inside of the sump or a "lip" on it?
do you just put a pin half way inbetween the acrylic?like if it was 1/4" you would put the pin approx 1/8" up?where do you apply the glue?
|