Quote:
Originally Posted by slief
You don’t need to use the Cole Parmer tubing. There is a link on the post 3 of the first page of this thread for the Pharmed type LS17 equivalent tubing from US Plastics that is sold by the foot. It also includes the parts needed to connect the tubing to 1/4” John Guest style push lock RODI tubing which is very convenient.
Here is the LS17 Pharmed type tubing sold by the foot.
http://www.usplastic.com/catalog/item.aspx?itemid=25534
I am pretty certain the screw is 8-32 x 2-1/4” and you will want a stainless socket head type. It would be pretty easy to take the pump and head down to a hardware store like Ace or True Value Hardware and match up a set of stainless screws rather than ordering them online. It would also likely be cheaper since you don’t need to worry about shipping. |
__________________
Gary
180 gallon, 40 gallon sump, 3 250 W MH + 4 80W ATI T5's, MTC MVX 36 Skimmer, Apex controller Aquamaxx T-3 CaRx
Current Tank Info: A 2 Barred Rabbitfish, Red Head Salon, Yellow/Purple, McMaster Fairy, Possum, 2 Leopard Wrasses, Kole, & Atlantic Blue Tangs, 2 Percula Clown, 3 PJ and 1 Banggai Cardinalfish , Swallowtail, Bellus and Coral Beauty Angels
|