View Single Post
Unread 09/15/2011, 03:40 PM   #131
EcoTech Marine
RC Sponsor
 
EcoTech Marine's Avatar
 
Join Date: Sep 2005
Location: Allentown, PA
Posts: 4,870
Quote:
Originally Posted by ganjero View Post
From this picture, aren’t the heatsinks really small for that amount of LEDs? isn't that going to shorten the life of the LEDs?
The size of the heat sinks don't determine the life expectancy of the LEDs, however the heat generated at the junction point does. Despite it's small stature, our fixture is capable of maintaining temperatures below the manufacturer's maximum rated specifications for the LED's in up to a 100deg environment. However we only claim up to 90deg in order to include a margin for safety. This means that so long as your room stays below 90deg your LED's will continue to operate at max capacity.

Further, the LED temperatures are actively monitored by our driver and in the event that the conditions become too hot for the LED's, the Radion will automatically dim the LED's to a safe level (reducing the current), preserving your LED's and alerting you that your light may need attention. In the extreme case it will shut down the LED's and blink red letting you know an error occurred.

Also realize that this test data collected by us was with all LED's at 100% max power, which equates to approximately 10k color temperature. If you run the fixture at cooler temps the red and green will be dimmed slightly and the total heat produced will be less.


__________________
Tim Marks

President
EcoTech Marine
www.ecotechmarine.com

If the above information doesn't help you, please contact us at 1-800-785-0338 ext. 2 or by e-mailing [email]support@ecotech
EcoTech Marine is offline   Reply With Quote