Reef Central Online Community - View Single Post - Trying to Integrate an Under the Tank Refugium

laverda · 01/07/2018, 02:34 AM

Your trickle filter could easily be made into an ATS. Just hang some roughed up mesh so the water drips down them. You may need to drill more holes above the mesh and block some of the other holes in the trickle plate. Than light with red and blus LEDs. Total cost less then $50 depending on the light you chose and should easily handle the bio load of a 90 gallon tank.

01/07/2018, 02:34 AM	#7
laverda Registered Member Join Date: May 2003 Location: Anaheim, CA Posts: 6,902	Your trickle filter could easily be made into an ATS. Just hang some roughed up mesh so the water drips down them. You may need to drill more holes above the mesh and block some of the other holes in the trickle plate. Than light with red and blus LEDs. Total cost less then $50 depending on the light you chose and should easily handle the bio load of a 90 gallon tank. __________________ 240G mixed reef, 29G SPS/LPS clam tank, 50G mixed reef Current Tank Info: 300g mixed reef, 50g cube