The Stand
I used a simplified version of RocketEngineer's DIY Stand for the framework. I wanted to use 1x4's instead of 2x4's but when I started the stand I didnt not know the actual dimensions of the tank/trim. Only the rough dimensions so I used 2x4's as a cushion. I would surely have rather used 3/4" plywood to build the stand but my woodworking expertise or lack thereof was an impediment to that venture - while I have 'decent' wood working tools IMO I have neither the experience nor skill to build a plywood stand that I would have felt comfortable with.
The following is the build process
First off the Kreg Pocket Jig - I love this thing! Used it all over!
The top frame getting glued - I used 2x6's as I do not plan to use center supports.
BTW my tank dimensions are: L 60.5 x W 24.5 x H 25
The top frame done - dont worry, bubble distortion from the camera lens is making the lengths look bowed!
I need more room! How does anyone get buy with a single 'car' garage?! Just kidding, im lucky to have what I have!
Attaching the legs - the stand will be about 40.4" tall when all is said and done.
Have I said how much I liked the pocket jig?