Quote:
Originally Posted by jubei2006
Have you checked any parameters on your mixed Saltwater? Are you dosing anything in your Cube? Are you using a chemical test or lab grade Probe? The redsea mixing instructions request large pump to aerate, sprinkle don't dump salt to unheated ro/di water. Not following could cause caco3 precipitate which could be causing your pH problem.
|
I use a 1080gph koralia to mix 5gallon bucket heated to 68 to mix then mixes for about 90 minutes to 76 to 78 to match my tank. I test with API kit i don't have time to use and do scientific experiments often. All elements were at 0 in fresh batch of saltwater. I do not dump I mix a 1/2 cup at a time within 15 minutes I have added all my salt mix to 1.023 then add very last bit to match my tank. Fluctuations are minimal on top up I add water atleast 2x a day not a lot just what I need never drops less than .001
Sent from my iPhone using Tapatalk