Reef Central Online Community - View Single Post - The "Hitchhiker's Guide" to the Maxi-Stream mod

dhnguyen · 11/27/2005, 08:49 AM

MJ900 mod w/fancy slots

Be very careful doing the next 2 steps.

Cutting the groove. For this I am using a 10" miter saw with a 7" fine toothed blade. At the highest height setting, the miter saw will come down just enough to cut into the 1.5" PVC pipe halfway through the plastic, making it ideal for cutting the groove. For those of you who chose to use the PVC test caps instead, you can skip this.

Cutting the slots

11/27/2005, 08:49 AM	#4
dhnguyen Moved On Join Date: May 2004 Location: Kingston, WA Posts: 4,751	MJ900 mod w/fancy slots Be very careful doing the next 2 steps. Cutting the groove. For this I am using a 10" miter saw with a 7" fine toothed blade. At the highest height setting, the miter saw will come down just enough to cut into the 1.5" PVC pipe halfway through the plastic, making it ideal for cutting the groove. For those of you who chose to use the PVC test caps instead, you can skip this. Cutting the slots Last edited by dhnguyen; 11/27/2005 at 09:24 AM.