Today we basically finished the stand. We will put the black on tomorrow and finish up the doors. Here are some pictures:
Here is the Face frame (3/4" Oak):
Here is the rear frame (3/4" Oak):
[IMG]http://i1090.photobucket.com/albums/i362/kdrof/IMG_0151.jpg[/IMG
Here is one of the biscuit that holds the face and rear frames together:
I dado'ed the edges to make the connection to the sides stronger:
I also dado'ed the bottom board on the face, rear, and sides so the floor will slide in for the sump.
Here is the inner side piece with the outer side piece behind it. Both 3/4". They will be 1.5" thick on each side.