[slief]

Originally Posted by h3dgehog

Resurrecting this old thread... (:

So if I were to push my dosing line through the top hole, how does it connect with the red tube part? Is the red tube part connected to the top hole in any way via push connect?

You do not connect your tubing to the red pipe in there. You push the dosing tubing through the hole in the top all the way down through the red tube. The red tube acts as both a vent and a guide to keep the peristaltic tubing down in the bottom of the dosing container. So no push connect fitting used with this dosing container nor is it needed. A push connect would require an additional vent in the lid if the peristaltic tubing was plumbed directly to the lid. And yes, the red tube which is actually pvc pipe, is welded to the white PVC top on the dosing container so when you unscrew the top, the red tube comes out with the top.