Quote:
Originally Posted by karimwassef
What would be great is if I can find an actuated butterfly valve to minimize the ramp time. That may be a separate DIY project using a standard valve with an external (dry) solenoid actuator. I expect the force required to make that work would be quite large.
The commercial ones are so expensive, I might as well buy a Tunze powerhead
http://viewer.zmags.com/publication/...#/d4e3ccef/204 |
http://www.usplastic.com/catalog/def...arentcatid=870
maybe something here will help? I am not fully aware of what you need for this setup but hope it helps?
I use this on my pool and maybe takes 10 secs to fully open/close? ~ $150 for actuator
http://www.pentairpool.com/pool-owne...tuator-186.htm
and use on a valve like this ~ $35 for valve
http://www.pentairpool.com/pool-owne...d-3-way-39.htm
click on specs for all the valve, probably just need a 2 way.
Not a butterfly, but ball valves?
__________________
Inwall Basement Setup w/ Growout Tank & Common Acrylic sump, SRO XP3000E, Neptune Apex, Bubble Magus Triple Doser, CLS- Super Dart Gold + OM 4way, 2-400w MH & 4-80w T-5, ROX .08 carbon...
|