Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > General Interest Forums > Do It Yourself
Register Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Old 03/08/2018, 11:32 AM   #1
Regulator23
Registered Member
 
Join Date: Jul 2016
Posts: 8
3/4" or 1" return - help please

thank you. I have 2 reef tanks (125G and 110G) that I am about to consolidate my fish and corals into a new acrylic 180. The 180 is peninsula style (viewed from 3 sides) with a single overflow box on one end. In the overflow box, there are two drain holes that will accommodate 1 1/2" PVC (I'll use 1 for drain and one for emergency) and a single return hole which will accommodate a 3/4" PVC. Here's where I need help.

Do you think it would be advisable to drill the return hole larger to accommodate 1" PVC? Both of my other tanks use 3/4" but I don't have nearly as strong of a pump on them (my new pump will push 4,100GPH at full power).

Not sure if it makes a difference, but I'm also going to run 2 MP40's from the same end of the tank. Flow shouldn't be an issue.

Anyway, that's one question/dilemma.


Regulator23 is offline   Reply With Quote
Old 03/08/2018, 11:46 AM   #2
mcgyvr
Registered Member
 
mcgyvr's Avatar
 
Join Date: Sep 2003
Location: North Carolina
Posts: 17,676
Your return hole size and piping used should be suitable for the pump being used and to not create a restriction..

Typically that would be the same size as the outlet of the pump or greater..

I highly doubt your 4100GPH pump has such a tiny 3/4" outlet..
And NO WAY are you going to get 4100GPH through 3/4" or even 1" really.

oh and FYI.. Typically for a 180G tank having return pump flowrate of up to 1800GPH after head loss.. (typically recommended to have 3 to 10x display tank size) is suitable..
4100GPH is massive overkill unless your sump is in your basement or 10+feet below the display tank


__________________
Being blunt and having fun
mcgyvr is offline   Reply With Quote
Old 03/08/2018, 03:39 PM   #3
mfinn
Registered Member
 
mfinn's Avatar
 
Join Date: Apr 2002
Location: Olympia. WA.
Posts: 8,557
If you are going to use loc-line on the inside of your tank on the return, might as well stay with the 3/4" bulkhead. As far as I know ( or could find) loc-line doesn't come in 1"


__________________
240 gallon soft coral tank
50 gallon lps tank
mfinn is online now   Reply With Quote
Old 03/08/2018, 06:13 PM   #4
Regulator23
Registered Member
 
Join Date: Jul 2016
Posts: 8
Got it. I have a smaller pump I think I'll use instead (I was just thinking bigger is better!!). I will have a manifold running off it, but that won't draw much flow at all. Thank you.


Regulator23 is offline   Reply With Quote
Old 03/08/2018, 09:01 PM   #5
kybreos
Snar snar
 
kybreos's Avatar
 
Join Date: Oct 2003
Location: Pinellas, FL
Posts: 932
MP40 will only make it half way, go with 1.5 Everything and use the big pump. If you want quiet go with DC.


Sent from my iPhone using Tapatalk


__________________
Simplify, trust me...

Current Tank Info: 180 Gallon Reef, Apex, Simplicity 320 DC Skimmer, 3 Radions Gen2,1 mp40w, Jebao PP-20, 55g sump, Jebao DCP-15000
kybreos is offline   Reply With Quote
Old 03/08/2018, 09:31 PM   #6
jccaclimber
Registered Member
 
Join Date: May 2013
Location: Dallas, Texas
Posts: 523
Other than the ability to fit bulkheads (don't forget the flange size and space to swing a wrench), larger pipes are never worse. If you are using loc-line you can always bring up a large pipe, split, then have multiple loc-line outlets.


jccaclimber is offline   Reply With Quote
Old 03/08/2018, 11:58 PM   #7
laverda
Registered Member
 
laverda's Avatar
 
Join Date: May 2003
Location: Anaheim, CA
Posts: 6,425
4100 GPH is a lot of flow and way more then you need. For that much flow you really want 1.5” tubing. I doubt you overflow will be able to handle 4100 gph. It is also very possible your sump will not either. It costs a lot in electricity to pump that much water up 6’ or so with no real benefit. Like uncle said 1800 GPH is plenty.


__________________
240G mixed reef, 29G SPS/LPS clam tank, 50G mixed reef

Current Tank Info: 300g mixed reef, 50g cube
laverda is online now   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 01:29 PM.


TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2018 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright 1999-2014
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.