|
10/17/2018, 01:34 PM | #1 |
Registered Member
Join Date: May 2015
Posts: 109
|
Biocube 29/32 gyre settings
Hi Biocube owners!
I am working on dialing in the IceCap 1k gyre I have on my biocube and am struggling to get something that creates flow, but doesn't move my sandbed dramatically. It's not creating sandstorms, but the sandbed opposite side of the tank from the gyre is clean to the glass and it's built up in the center of the tank. I'm using the pulsing program for most of the day with max 30%, 1.5 second change intervals. What settings are others with these tanks and sandbeds usings? |
01/13/2019, 07:51 PM | #2 |
Registered Member
Join Date: Jan 2019
Posts: 12
|
I have same issue, what did u end up doing?
Sent from my SM-G965U using Tapatalk |
02/09/2019, 10:28 PM | #3 |
Registered Member
Join Date: Feb 2019
Posts: 21
|
I had the same issue as well. I found that dropping down to gyre at 20%+ and 10- was good.
Granted, I’ve only had it for 3 weeks. I pulled the IceCap out today. I was debating between AI Nero 5 or Wavemaker Puck 2. My LFS told be to grab the puck... so I did. So far, I really like it. But I’ll give it a week and will see if I will switch back. Sent from my iPhone using Tapatalk |
04/18/2019, 09:19 AM | #4 |
Registered Member
Join Date: Jul 2005
Location: Taiwan (formerly, Atlanta area)
Posts: 199
|
This used to happen when I first got my tank running. But, as the tank and sandbed has matured, I've been able to increase the flow on my gyre. You may also try changing the placement of the gyre (lowering or raising it) on the glass.
|
08/03/2020, 04:40 PM | #5 |
Registered Member
Join Date: Jan 2019
Posts: 12
|
It will get better as the tank matures. My 32cube w/ 1k gyre was so powerful at 1st but I only turned it up to 10 im the beginning. Now I can go as high as I want even after cleaning it. The gap growing on one side also helps disperse the current
Sent from my SM-G988U using Tapatalk |
08/03/2020, 04:42 PM | #6 |
Registered Member
Join Date: Jan 2019
Posts: 12
|
GSP* not gap
Sent from my SM-G988U using Tapatalk |
|
|