|
07/17/2017, 12:33 PM | #1 |
Registered Member
Join Date: Oct 2001
Location: UK
Posts: 190
|
Settings for a pair of Stream 3 (6150)
Just need to confirm the set up for a pair of opposing pumps, at the back of the tank.
I've directly connected the two controllers using the Tunze cable. On one side selected "reverse" mode by holding the feed button for 5secs and its showing flashing red. The other controller I want to put into "auto select" mode to find resonnance wave etc then switch to "wave ok". Question - on the "reverse" pump do I leave it in the "flashing red" mode ? Or externally controlled? Thanks
__________________
July 2005 TOTM: http://www.reefcentral.com/forums/showthread.php?s=&threadid=622913 Current Tank Info: Spec: 7.5'x4' in the wall tank, with SPS and LPS. 8'x2' refugium. Water volume 1000gal approx. |
07/17/2017, 01:46 PM | #2 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
It should be in external mode.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
07/18/2017, 02:19 AM | #3 |
Registered Member
Join Date: Oct 2001
Location: UK
Posts: 190
|
Thanks!
__________________
July 2005 TOTM: http://www.reefcentral.com/forums/showthread.php?s=&threadid=622913 Current Tank Info: Spec: 7.5'x4' in the wall tank, with SPS and LPS. 8'x2' refugium. Water volume 1000gal approx. |
Thread Tools | |
|
|