|
01/09/2017, 10:51 AM | #1 |
Registered Member
Join Date: Apr 2011
Location: San Diego, CA
Posts: 1,405
|
Tank slightly out of level.. concern?
Tank is 120G, standard 4x2x2. Glass is 3/4" rimless. It's located in a room that is part of a home addition we built last year. When I put the tank in the room, it was perfectly level (as best I could remember)...
However, I just checked and back right corner is 1/16" higher than all the other corners. Maybe the floors settled in over the last few months. The tank is sitting on a 3/4" foam board on top of the stand. Should this be a concern or only small issue. I was thinking try to make an adjustment next time I clean out the sump, maybe in 6 months. Or should this be immediate concern?
__________________
180G Rimless Starphire 72x24x24 (Miracles) 3 x Ecotech XR15w G4 Pro | T5 x 4 | 2 x Mp40wQD GEO 612 Cal Reactor | Vertex Omega 150 Skimmer | Chaeto Reactor Synergy Reef CL44 Sump | Neptune Apex |
01/09/2017, 11:36 AM | #2 |
Registered Member
Join Date: Feb 2003
Location: Wisconsin, The big peninsula
Posts: 2,100
|
I would not be concernerd about a 1/16 of an inch. There are several reasons wood floors and joists could move that amount. Measure it again in six months.
|
01/09/2017, 11:37 AM | #3 |
Registered Member
Join Date: Apr 2016
Location: Vancouver
Posts: 1,596
|
Not a concern IMO. 1/4" I would be concerned.
|
Thread Tools | |
|
|