|
09/20/2017, 08:09 PM | #1 |
Registered Member
Join Date: Aug 2017
Posts: 2
|
MP10 Glass Thicknes
Will this work for 10mm glass? I was looking at the SC Aquariums 50G PNP EcoTech Marine version. After researching the components I was concerned as the EcoTech site lists max glass at 9.5mm. On the other hand would anyone sell a branded kit that doesn't work?
|
10/03/2017, 07:39 AM | #2 |
Gone Fishin'
Join Date: Aug 2006
Location: Richmond, VA
Posts: 166
|
Mine work on 1/2 inch glass.
__________________
Beware of the forum Moo Moo ladies, they can't be reasoned with. Current Tank Info: 270+180 + 75= 525 & 65 + 15= 80 |
10/03/2017, 01:44 PM | #3 |
Grizzled & Cynical
Join Date: Apr 2006
Location: Stamford, CT
Posts: 17,319
|
ETM say 9.5 mm glass max, so you're pushing it a bit. Wetside may fall off if you run an aggressive program.
__________________
Simon Got back into the hobby ..... planned to keep it simple ..... yeah, right ..... clearly I need a new plan! Pet peeve: anemones host clowns; clowns do not host anemones! Current Tank Info: 450 Reef; 120 refugium; 60 Frag Tank, 30 Introduction tank; multiple QTs |
Thread Tools | |
|
|