Water sensors and feed mode

juanmanuelsanch · 12/16/2017, 07:02 PM

So I have an extension that connects some equipment in my sump. There is a water optical sensor in the sump that turns offs everything in case there is a water level raise. I dont want it to work like that when the feed mode is on. Is there a way to do it?

So far the code is:

Fallback ON
Set OFF
If Time 08:58 to 22:15 Then ON
If Sensum CLOSED Then OFF
If Sensfl CLOSED Then OFF
If FeedA 000 Then ON

It works like its desired but when the feed cycle A is over it will turn everything off, which is something I dont want.

Any help is appreciated.

Thanks in advance.

mal7887 · 12/16/2017, 08:45 PM

I'm a little confused as to what you want to do. Are you wanting certain equipment to turn off or stay on when feed mode is activated? And do you want it to ignore switch state when feed mode is activated?

juanmanuelsanch · 12/18/2017, 12:38 PM

To stay on when the feed mode is activated.

Sent from my SM-G950F using Tapatalk

juanmanuelsanch · 12/18/2017, 04:15 PM

Done. I had to put a delay in the feed timer.

Thanks!

Sent from my SM-G950F using Tapatalk

neilp2006 · 01/02/2018, 08:48 PM

I’d be interested in seeing your solution- I’m anticipating this situation once I set mine up in a few weeks

Thanks

juanmanuelsanch · 01/02/2018, 08:59 PM

The code would be this

Fallback ON
Set OFF
If Time 08:58 to 22:15 Then ON
If Sensum CLOSED Then OFF
If Sensfl CLOSED Then OFF
If FeedA 015 Then ON

Sent from my SM-G950F using Tapatalk

12/16/2017, 07:02 PM	#1
juanmanuelsanch Registered Member Join Date: May 2011 Posts: 408	Water sensors and feed mode So I have an extension that connects some equipment in my sump. There is a water optical sensor in the sump that turns offs everything in case there is a water level raise. I dont want it to work like that when the feed mode is on. Is there a way to do it? So far the code is: Fallback ON Set OFF If Time 08:58 to 22:15 Then ON If Sensum CLOSED Then OFF If Sensfl CLOSED Then OFF If FeedA 000 Then ON It works like its desired but when the feed cycle A is over it will turn everything off, which is something I dont want. Any help is appreciated. Thanks in advance.

12/16/2017, 08:45 PM	#2
mal7887 Registered Member Join Date: Jun 2010 Location: Tampa Posts: 643	I'm a little confused as to what you want to do. Are you wanting certain equipment to turn off or stay on when feed mode is activated? And do you want it to ignore switch state when feed mode is activated? __________________ Matt Don't pee on my leg and tell me it's raining. Current Tank Info: 190

12/18/2017, 12:38 PM	#3
juanmanuelsanch Registered Member Join Date: May 2011 Posts: 408	To stay on when the feed mode is activated. Sent from my SM-G950F using Tapatalk

12/18/2017, 04:15 PM	#4
juanmanuelsanch Registered Member Join Date: May 2011 Posts: 408	Done. I had to put a delay in the feed timer. Thanks! Sent from my SM-G950F using Tapatalk

01/02/2018, 08:48 PM	#5
neilp2006 Registered Member Join Date: Oct 2015 Posts: 312	I’d be interested in seeing your solution- I’m anticipating this situation once I set mine up in a few weeks Thanks

01/02/2018, 08:59 PM	#6
juanmanuelsanch Registered Member Join Date: May 2011 Posts: 408	The code would be this Fallback ON Set OFF If Time 08:58 to 22:15 Then ON If Sensum CLOSED Then OFF If Sensfl CLOSED Then OFF If FeedA 015 Then ON Sent from my SM-G950F using Tapatalk