|
11/18/2018, 11:38 PM | #1 |
Registered Member
Join Date: Sep 2012
Location: San Jose, CA
Posts: 250
|
7096 light sensor replacement
My 7096 light sensor is not working, so I can no longer use night mode. Is it possible to cut the wires and attach a new light sensor myself? If so, what type LDR should I buy and what color wires are attached to the resistor vs the moon light?
__________________
72"x24"x21" 155g DSA all glass tank, 35g sump, Reef Octopus POV DC1 Skimmer DIY Lighting with 96x CREE XP-G-R5 and XT-E, UV, Orange/Red and Green LED. |
11/19/2018, 10:50 AM | #2 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
It is replaceable, it unplugs inside the controller and this is the part you need-
https://www.tunze.com/US/en/products...id%5D=7095.050
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
11/19/2018, 03:40 PM | #3 |
Registered Member
Join Date: Sep 2012
Location: San Jose, CA
Posts: 250
|
Order placed. Thanks!
__________________
72"x24"x21" 155g DSA all glass tank, 35g sump, Reef Octopus POV DC1 Skimmer DIY Lighting with 96x CREE XP-G-R5 and XT-E, UV, Orange/Red and Green LED. |
11/19/2018, 03:49 PM | #4 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
Got it, it will mail out tomorrow.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
12/01/2018, 08:52 PM | #5 |
Registered Member
Join Date: Sep 2012
Location: San Jose, CA
Posts: 250
|
All is well, thanks
__________________
72"x24"x21" 155g DSA all glass tank, 35g sump, Reef Octopus POV DC1 Skimmer DIY Lighting with 96x CREE XP-G-R5 and XT-E, UV, Orange/Red and Green LED. |
|
|