|
08/14/2019, 02:31 AM | #1 |
Premium Member
Join Date: Aug 2003
Posts: 428
|
Help with mp40 second gen. wetside
Hello all, I bought two used mp40's. I took out the cage on the wetsides and both were spinning fine.
I took it apart to inspect the rest (magnet, ect). After reasembling, the magnet does not spin when I turn the propeller. I watched the video and put things back like they should be. I called Vortech and basically told me I needed new wet sides. Has anyone have this problem?. Solution? thanks, Albert |
08/15/2019, 08:45 AM | #2 |
Premium Member
Join Date: Aug 2003
Posts: 428
|
I bought a few nylon washers yesterday but still having the same problem.
Should I just put it in the tank and see if it fixes itself. Weird how it was fine before I took it apart and now the prop does not spin the magnet. I've read a few post where the same problem has happened but seems like the only solution is to get a new Wet Side. Angons? |
08/15/2019, 08:46 AM | #3 |
Premium Member
Join Date: Aug 2003
Posts: 428
|
Meant "anyone?"
|
08/18/2019, 12:19 PM | #4 |
Registered Member
Join Date: Jan 2006
Location: Westminster, CO
Posts: 17,289
|
Post pictures. Are these the older style or the mp60/10 style?
The older 40 style has many variables. If it isn't spinning it's likely the bearing not being seated properly. Also, It wouldn't hurt to get a new wetside so you can rotate through, clean, and inspect them. One day they are going to fail... the old style is well... very old at this point.
__________________
Hobby Experience: 9200ish gallons, 26 skimmers, and a handful of Kent Scrapers. Current Tank: Vortech Powered 600G SPS Tank w/ 100gal frag tank & 100g Sump. RK2-RK10 Skimmer. ReefAngel. Radium 20k. |
|
|