|
11/22/2018, 12:05 PM | #1 |
Registered Member
Join Date: Feb 2013
Location: Ottawa
Posts: 84
|
ATK Alarms constant
Installed an ATK last night to my Apex EL, and im getting constant alarms. UNit is installed with bottom optical just at water line. I have currently set my alarm email status to off. Please help.
Item Date Status Statement 1 2018-11-22 00:21:35 -0500 ON If Swx3_1 CLOSED Then ON 2 2018-11-22 01:21:34 -0500 ON If Swx3_1 CLOSED Then ON 3 2018-11-22 02:21:35 -0500 ON If Swx3_1 CLOSED Then ON 4 2018-11-22 03:21:36 -0500 ON If Swx3_1 CLOSED Then ON 5 2018-11-22 04:03:50 -0500 OFF Set OFF 6 2018-11-22 04:03:53 -0500 ON If Swx3_1 CLOSED Then ON 7 2018-11-22 04:10:23 -0500 ON Set OFF 8 2018-11-22 04:10:25 -0500 ON If Swx3_1 CLOSED Then ON 9 2018-11-22 04:11:07 -0500 OFF Set OFF 10 2018-11-22 04:11:45 -0500 ON If Swx3_1 CLOSED Then ON |
11/22/2018, 12:06 PM | #2 |
Registered Member
Join Date: Feb 2013
Location: Ottawa
Posts: 84
|
Fallback OFF
Set OFF If Swx3_1 OPEN Then ON If Swx3_2 CLOSED Then OFF When On > 005:00 Then OFF Defer 000:10 Then ON Defer 000:04 Then OFF Min Time 060:00 Then OFF |
11/22/2018, 08:16 PM | #3 |
Registered Member
Join Date: Jan 2007
Location: El Cajon, CA
Posts: 7,818
|
You have the wrong in the email alarm program.
Swx3_1 is the low optical sensor, which determines if ATO is needed or not. Swx3_2 is the high-level optical sensor, which is used as a safety check should the water level rise above the normal level. That's the one you would want an alarm about. Change: If Swx3_1 CLOSED Then ON to: If Swx3_2 CLOSED Then ON |
11/22/2018, 08:18 PM | #4 |
Registered Member
Join Date: Jan 2007
Location: El Cajon, CA
Posts: 7,818
|
And you should change the input names to something descriptive and more meaningful.
For example, change Swx3_1 to ATO-OS and Swx3_2 to SumpHi |
11/22/2018, 11:05 PM | #5 |
Registered Member
Join Date: Feb 2013
Location: Ottawa
Posts: 84
|
Thank you but it appears to be still alarming for now will let it sit
2018-11-23 00:00:54 -0500 OFF If Swx3_1 CLOSED Then ON 2 2018-11-23 00:00:57 -0500 ON If Swx3_1 CLOSED Then ON |
11/22/2018, 11:14 PM | #6 |
Registered Member
Join Date: Feb 2013
Location: Ottawa
Posts: 84
|
Changing _1 to closed then off and -2 to closed then on seems to have worked. Why would it configure wrong out of the box ugh
|
11/26/2018, 01:34 PM | #7 |
Registered Member
Join Date: Feb 2015
Location: San Jose, CA
Posts: 2,136
|
I hope you did not make the change in the ATK outlet programming.
That programming that you listed is correct. The change should be made in the Email Output.
__________________
Vincent 40g custom AIO --> DSA190Pro |
|
|