|
|
|
09/15/2020, 10:05 AM
|
#1 |
|
Registered Member
Join Date: May 2018
Posts: 814
|
Does my plumbing make sense?
If i hard plumb my sterilizer with 2 Tees kind of like a manifold and add a valve to slow down flow for contact time in sterlizer
Will the water make it back up? I have attached a rough sketch if what I want to achieve minus unions. My pump is 2000gph vectra m1 Thanks  Sent from my SM-G973U using Tapatalk |
|
|
|
09/15/2020, 05:57 PM
|
#2 |
|
Registered Member
Join Date: Nov 2002
Location: Miller Place, NY
Posts: 7,206
|
Questionable. You have head pressure to overcome.
Better to have it running parallel close to the same height with a valve & then flow would help the output some.. IMHO
__________________
250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps. |
|
|
|
|
09/16/2020, 05:50 AM
|
#3 |
|
Ver. 2.1
 
Join Date: Mar 2005
Location: Rehoboth, MA
Posts: 1,803
|
I would put 3 gate not ball values in.
One on each return to the tank, the other for the UV. This way you can have better control over all three. Or, as I do, run from the pump to a tee, then one line straight to the tank, the other thru the UV then to tank. Gate valves on the 2 for flow control.
__________________
Pete "I never make mistakes... I thought I did once, but I was wrong" Current Tank Info: In the process - http://reefcentral.com/forums/showthread.php?t=2661614 |
|
|
|
 |
| Thread Tools | |
|
|
