|
11/18/2018, 10:48 PM | #1 |
Registered Member
Join Date: Apr 2009
Location: Clinton, NJ
Posts: 771
|
Cleaning aquarium for re-boot
Shut my reef down after an almost two year battle with dinos. It has been down a couple of months now, and I am getting ready to re-boot. I’m trying to avoid getting any dino’s Back- they really screwed me, but want to make sure I’m doing this the right way.
So far I have filled it up with a 3:1 water to vinegar mixture, and let all the equipment run for a couple of days. I then scrubbed off all the old coralline, and emptied it for another week. I have now filled it back up with just normal tap water to let all the equipment run again, and give it a good rinse from the vinegar mixture. I was contemplating mixing some h2o2 in the tank while it is rinsing- just for good measure, but I read that the mixture of vinegar and h202 could be hazardous. Now for me- the concentrations of each would be so low since they will be in the presence of 75 gallons of freshwater- but my questions- is it dangerous, and is it necessary. My biggest concern is getting any possible traces out of plumbing that I cannot get at behind the overflow. Looking forward to hearing your thoughts and opinions. Thanks
__________________
-Steve Current Tank Info: 20 gallon high nano mixed reef 4x24 t5HO with lunar LEDS. |
11/19/2018, 10:14 AM | #2 |
Registered Seaweedist
Join Date: Feb 2004
Location: Boulder, CO
Posts: 5,807
|
I'm in a similar boat. I had dinos, aiptasias and runaway, invasive macro algae. After draining the tank, I sprayed it down with a bleach solution. After letting dry out for months, I've sprayed it down with water to rinse. I will rinse again before filling it. That's about it. Oh, also I'm starting with new sand and live rocks.
I think what you've done sounds really good. I don't know about that combo being dangerous. You could google it. I understand your paranoia. You want to make sure it doesn't come back! I share your concerns with traces in the plumbing, so I've added a UV sterilizer. Like many of us, I tried a lot of different things to battle the dinos. The UV worked. So I'm keeping it plumbed into my system to use whenever needed. I'll probably keep it on for a while after startup to combat any possible residue. Good luck, Steve! Here's to a dino-free future!
__________________
As many naturalists and environmentalists have suggested, we should set aside our arrogance, our desire to conquer and control everything, and walk hand in hand with Mother Nature. -Walter Adey Current Tank Info: 180g Seagrass Sandbar Lagoon, START DATE November 28, 2018 |
11/19/2018, 10:35 AM | #3 | |
Registered Member
Join Date: Apr 2009
Location: Clinton, NJ
Posts: 771
|
Quote:
I've just seen that these dinos can survive a crazy amount. Trying to do as much as I can before booting back up
__________________
-Steve Current Tank Info: 20 gallon high nano mixed reef 4x24 t5HO with lunar LEDS. |
|
11/19/2018, 12:16 PM | #4 |
Registered Member
Join Date: Dec 2009
Location: Wichita KS
Posts: 2,621
|
You're probably OK to start now. After you've drained the tap water & filled with RODI, any remaining vinegar would be so dilute that it wouldn't be harmful. The hydrogen peroxide is probably not needed unless there is some organic build-up you are worried about. The vinegar, and the chlorine in the tap water, likely killed anything you need to worry about.
__________________
John, Current Tank Info: In-process, 90 Gallon SPS Reef |
11/20/2018, 11:23 PM | #5 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
It's likely that your procedure has killed a lot of microbes that were in the equipment. There might be encysted forms in the environment, but there's little you can do about that.
__________________
Jonathan Bertoni |
Thread Tools | |
|
|