|
|
|
05/21/2017, 02:10 AM
|
#1 |
|
Registered Member
Join Date: Feb 2005
Location: Sweden
Posts: 111
|
Heater in 3162
It have ordered the filter 3162 and eheim 50 w heater which is good match I understand. I became i bit concerned when I saw this video on a Tunze demo.
Preview: TUNZE® Comline® Filter 3162, at Interzoo 2012 https://www.youtube.com/watch?v=_MO4dKQuHvo The min water level for the heater is well above the waterline. Appreciate any input on this. |
|
|
|
05/22/2017, 09:54 AM
|
#2 |
|
RC Sponsor
 
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
The European 50W and 75W Eheim heater work well, the main point is that the thermostat is submerged, the US 75W is slightly different and does not work well.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
|
|
|
|
05/23/2017, 03:01 PM
|
#3 |
|
Registered Member
Join Date: Feb 2005
Location: Sweden
Posts: 111
|
Thanks! Ok then I change my order to 75 w eheim heater.
Eheim and jaeger are the same heaters I understand? Last edited by PatrikD; 05/23/2017 at 03:07 PM. |
|
|
|
|
05/23/2017, 03:09 PM
|
#4 |
|
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
Yes, Eheim bought Jaeger some years ago when Mr. Jaeger retired. He was a very good man that made what I think is still the best heater.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
|
|
|
|
05/24/2017, 09:20 AM
|
#5 |
|
Registered Member
Join Date: Feb 2005
Location: Sweden
Posts: 111
|
Isn't the 75 w (27 cm vs 24.1) model a bit longer? I interpret your answer that the 75 w heater is even more above water (3 cm) but it does'nt matter as long as the thermostat is submerged.
|
|
|
|
|
05/24/2017, 09:29 AM
|
#6 |
|
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
Hmm, you are correct, I just checked the specs. I know that the factory recommendation of 75W was based on the 75W Jaeger heater, the US one does not work because our 115V coil is longer and the thermostat is higher in the tube, however, I cannot rule out a design change so the 230V would maybe not work. In former times the US version was Ebo Jaeger and made in California for the US market, it was the same product the tubes and parts came from Germany, but it had our coil, now Eheim makes all of them in Germany and may have moved to standardize them as much as possible.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
|
|
|
|
06/11/2017, 11:55 AM
|
#7 |
|
Registered Member
Join Date: May 2017
Posts: 82
|
I have a 3163 and a eheim 75w. It sticks out past minimum water level but seams to be working just fine.
|
|
|
|
|
06/12/2017, 09:13 AM
|
#8 |
|
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
That is what the white clip goes to. I suspect in your case it works as your filter is nearly 1" deeper than they usually are, typically the teeth are only about 1/4-1/2" submerged, the surface skimming is much more aggressive with a lower submersion but then typically the thermostat portion of the heater is not submerged on US models as the 115V coil is longer and the thermostat is up higher as a result.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
|
|
|
 |
|
|
