Reef Central Online Community
Marine Depot

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > Sponsor Forums > Royal Exclusiv / Bubble King
Register Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Old 05/30/2019, 12:18 PM   #526
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 13,808
Quote:
Originally Posted by nly04 View Post
I got a seen like Gen1 mini200 with the Red Dragon Mini Skimmer pump 1000. Spec for air intake only draw 1000l/h. Is it right? See picture.
Yes but don't get caught up in the air intake numbers since that skimmer was designed to be used and balanced around that pump. Air intake numbers are more for bragging rights as it's all about the fineness of the bubbles and balance inside the skimmer. Also, the numbers are conservatively rated. Air draw is likely closer to 1200l/hr.


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is online now   Reply With Quote
Old 05/30/2019, 01:54 PM   #527
nly04
Registered Member
 
nly04's Avatar
 
Join Date: May 2013
Location: Union City, SF bay area
Posts: 982
Do you still carry that pump incase I need to replace it? If not, what's the replacement pump model? The skimmer was purchase around 9 year ago but the pump only run for about 2.5-3years.


nly04 is offline   Reply With Quote
Old 05/30/2019, 02:07 PM   #528
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 13,808
Quote:
Originally Posted by nly04 View Post
Do you still carry that pump incase I need to replace it? If not, what's the replacement pump model? The skimmer was purchase around 9 year ago but the pump only run for about 2.5-3years.
This is the replacement motorblock which is typically in stock in our Ft. Myers warehouse. When properly maintained, those pumps will last indefinitely. If something is going to fail, it’s typically the block and usually due to a lack of improper maintenance.
https://royalexclusiv.com/Spare-Part...VS07::164.html


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is online now   Reply With Quote
Old 07/14/2019, 02:26 AM   #529
farbs
Registered Member
 
Join Date: Oct 2011
Posts: 18
Hi, please help with some tips. I've read this whole thread and followed all advice but still having trouble.mI have a double cone 150 that I picked up about 3 w-4 weeks ago used but in awesome condition. Tank and sump is 300 litres.
Now I cannot get this thing tuned no matter how hards I try.
I have it in 17cm depth and have the volute one 4.5 turns and wedge pipe fully opened.
After a lot of heartache I thought I finally had it and was skimming nicely (dark tea coloured skim mate). Did a water change this morning roughly 10%, turned the skimmer back on and it's been overflowing for the rest of the day.
I really want to keep this skimmer but have had nothing but trouble with it.
Any advice would be so greatly appreciated.


farbs is offline   Reply With Quote
Old 07/14/2019, 03:33 AM   #530
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 13,808
You’re water change could have impacted the surface tension resulting in the overflowing condition. Depending on the salt mix, how well it was mixed and other factors, your new salt water could be causing the issue. Also, if you bought this skimmer used, make sure the venturi port on the nozzle where the air hose connects ins’t clogged with dried salt.

The other thing that can impact it is if you still have the skimmer tuned improblerly. While it’s overflowing, my best advice would be to make nozzle adjustments to get the overflow condition to stop. This may require going further out on the nozzle or more in depending on the root cause of the overflow. My guess is that once you get this issue tuned out via more nozzle adjustments, it should be more stable going forward though you might have to close the wedge pipe some to get it to produce depending on your fish load. Also keep in mind that a tiny fraction of a turn on the nozzle can make a big difference so make small adjustments and use rubber gloves when making those adjustments so that the oils in your skin don’t impact the water and cause the skimmer to go flat forcing you to wait to see the results of the adjustment.


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is online now   Reply With Quote
Old 07/14/2019, 03:40 AM   #531
farbs
Registered Member
 
Join Date: Oct 2011
Posts: 18
Thankyou so much for the reply.
I have tried turning the volute out to 5 turns, 5.5 turns and even 6 turns still to no avail. Everything was cleaned spotlessly before I put it in the tank. It's been overflowing literally all day, I thought it might settle after a couple of hours, but nope, it's literally like a waterfall
Should I just leave it overflowing overnight to see if it settles?


farbs is offline   Reply With Quote
Old 07/14/2019, 03:44 AM   #532
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 13,808
Quote:
Originally Posted by farbs View Post
Thankyou so much for the reply.
I have tried turning the volute out to 5 turns, 5.5 turns and even 6 turns still to no avail. Everything was cleaned spotlessly before I put it in the tank. It's been overflowing literally all day, I thought it might settle after a couple of hours, but nope, it's literally like a waterfall
Should I just leave it overflowing overnight to see if it settles?
You could lower the sump level another CM or raise the skimmer by placing something under it. That should help. If it’s something in the water, short of skimming it out by collecting the overflow, that’s about all you can do. Waiting it out might help but I’d adjust the sump level. You might see what happens if you turn the nozzle inwards but I’d go back to your original setting that was working and lower the sump level or raise the skimmer a CM or 2 as that will make it less sensitive and more forgiving to changes in the water.


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476

Last edited by slief; 07/14/2019 at 03:50 AM.
slief is online now   Reply With Quote
Old 07/14/2019, 04:19 AM   #533
farbs
Registered Member
 
Join Date: Oct 2011
Posts: 18
Thankyou again!
I have turned it off for now and will try raising it 2 cm tomorrow and will let you know how it goes, if that doesn't help I might just have to go back to my old skimmer, which would be devastating as I have dreamt of owning Bubble king for years. Is it possible that the skimmer is just over sized for my tank and stock level.


farbs is offline   Reply With Quote
Old 07/14/2019, 08:25 AM   #534
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 13,808
Quote:
Originally Posted by farbs View Post
Thankyou again!
I have turned it off for now and will try raising it 2 cm tomorrow and will let you know how it goes, if that doesn't help I might just have to go back to my old skimmer, which would be devastating as I have dreamt of owning Bubble king for years. Is it possible that the skimmer is just over sized for my tank and stock level.
While it might be on the large side, that wouldn’t explain the overflow. The overflowing is a sign of the skimmer not being tuned or setup properly. You just need to keep working with it to fine tune this thing for your setup. The lowered sump depth will help a lot.


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is online now   Reply With Quote
Old 07/15/2019, 01:51 AM   #535
farbs
Registered Member
 
Join Date: Oct 2011
Posts: 18
Hi,
I raised the skimmer a couple of cm's and still overflowing so raised again. It is now in literally 14cm depth and still overflowing like crazy. Volute opened 4.5 turns and wedge pipe fully open.
I have the drain on the collection cup open so the overflow id draining back into sump.
I've tried tuning it by turning the volute and still nothing
I really wanted to love this skimmer!!
I'll love it and let it drain a couple of hours but I really think I've reached my limit


farbs is offline   Reply With Quote
Old 07/15/2019, 01:57 AM   #536
farbs
Registered Member
 
Join Date: Oct 2011
Posts: 18
Her is a couple of Pic's if that helps at all


Attached Images
File Type: jpg IMG_4658.jpg (63.6 KB, 15 views)
File Type: jpg IMG_4659.jpg (95.3 KB, 15 views)
farbs is offline   Reply With Quote
Old 07/15/2019, 03:43 AM   #537
farbs
Registered Member
 
Join Date: Oct 2011
Posts: 18
Well I've let it let run for literally 3.5 hrs and it still hasn't settled, so don't know what's left to do?


farbs is offline   Reply With Quote
Old 07/15/2019, 07:14 AM   #538
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 13,808
Quote:
Originally Posted by farbs View Post
Well I've let it let run for literally 3.5 hrs and it still hasn't settled, so don't know what's left to do?
Is it possible that something got into the skimmer pump when when you shut it off? Maybe a snail? The only thing you can do besides inspecting the pump would be to turn the nozzle way inwards and see what it does. Go all the way to 1 - 1.5 turns out from fully closed and see if that helps. Then turn it further outwards than 4.5-5 turns out and see what it does. There should be some point in the nozzle adjustment between fully closed and fully out that makes it subside. Having said that, I suspect something in your new salt mix likely caused this and if you’re not removing and simply letting it overflow back into the sump, you are not going to remove it. And if there is any restriction in the air intake whether it’s the silicone air hose being kinked or the venturi port on the pump being clogged or something in the needle wheel, you will get overflows like you are experiencing. And be 100% certain that the wedge is fully open. You can raise wedge pipe up out of the fitting and see where the angled piece of pipe would be blocking the effluent/exit from the skimmer.


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is online now   Reply With Quote
Old 07/16/2019, 06:03 PM   #539
farbs
Registered Member
 
Join Date: Oct 2011
Posts: 18
Hi, and once again thankyou so much for taking the time to reply and offer advice.
So I pulled everything apart and everything was spotless, so I thought one last effort I would just let it run. I closed off the drain and just collected what was overflowing and ended up being about 3-4 litres. which was easy to replace and it finally settled down. I will run it now till the weekend when I will do another water change and see if it happens again. I just find it funny that I have been using this same salt for the 3-4 months.
Any way we are back on track. I might even lower it back another 2 cm. And hoping I can really fall in love with this skimmer!.


farbs is offline   Reply With Quote
Old 07/16/2019, 08:30 PM   #540
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 13,808
Quote:
Originally Posted by farbs View Post
Hi, and once again thankyou so much for taking the time to reply and offer advice.
So I pulled everything apart and everything was spotless, so I thought one last effort I would just let it run. I closed off the drain and just collected what was overflowing and ended up being about 3-4 litres. which was easy to replace and it finally settled down. I will run it now till the weekend when I will do another water change and see if it happens again. I just find it funny that I have been using this same salt for the 3-4 months.
Any way we are back on track. I might even lower it back another 2 cm. And hoping I can really fall in love with this skimmer!.
It likely was something in your salt or maybe it wasn’t mixed well enough or there was some precipitation due to the mix separating in the bag if you didn’t use the whole bag of salt when you mixed your new salt water. When you ran it and collected the overflow, you would be exporting whatever was in the water causing it to go nuts. This is why I said you’re not removing anything if you’re just letting it overflow. Glad to hear it’s settling down. Not sure you need to go lower on the sump level. I’d let it run and see how it performs.


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is online now   Reply With Quote
Old 07/16/2019, 08:49 PM   #541
farbs
Registered Member
 
Join Date: Oct 2011
Posts: 18
I can't thank you enough for helping me through this! It was very kind of you.
Hopefully I will not have to post anymore


farbs is offline   Reply With Quote
Old 07/16/2019, 09:09 PM   #542
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 13,808
Quote:
Originally Posted by farbs View Post
I can't thank you enough for helping me through this! It was very kind of you.
Hopefully I will not have to post anymore
Very very glad to help!


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is online now   Reply With Quote
Old 07/29/2019, 02:14 PM   #543
Antics
Registered Member
 
Antics's Avatar
 
Join Date: Nov 2012
Posts: 50
Sorry if it's been asked already but is there a noticeable improvement in performance by using one of the aqua driver heads? Specifically with a DC 180?


Antics is online now   Reply With Quote
Old 07/29/2019, 03:26 PM   #544
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 13,808
Quote:
Originally Posted by Antics View Post
Sorry if it's been asked already but is there a noticeable improvement in performance by using one of the aqua driver heads? Specifically with a DC 180?
It reduces the maintenance on the skimmer since you rarely need to remove the collection cup (I only remove mine every several months) and it also improves consistency since the grime in the neck never builds up but you still maintain the slime coating. The grime as it builds up, impacts how the foam rises. It creates friction causing some of the bubbles to burst while it also reduces the diameter of the neck causing the skimmer to skim wetter as it builds up. So maintaining a virtually grime free neck helps keep the skimmer more consistent and the slime coating which is part of the break-in process keeps the foam rising up the neck smoothly.


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is online now   Reply With Quote
Old 07/30/2019, 05:40 PM   #545
Antics
Registered Member
 
Antics's Avatar
 
Join Date: Nov 2012
Posts: 50
Thanks for the response! I really want to try out the cleaning head as well as the dream boxes.


Antics is online now   Reply With Quote
Old 08/17/2019, 10:08 AM   #546
Jeezy85
Registered Member
 
Join Date: Jun 2018
Posts: 6
Hey people..

I have a bubble king mini 200... for some reason this skimmer is giving out crap loads of micro bubbles.. any tips to fix this please?


Jeezy85 is offline   Reply With Quote
Old 08/17/2019, 04:35 PM   #547
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Location: Simi Valley, Ca
Posts: 13,808
Quote:
Originally Posted by Jeezy85 View Post
Hey people..

I have a bubble king mini 200... for some reason this skimmer is giving out crap loads of micro bubbles.. any tips to fix this please?
What model pump does it have? If it’s the RD3, what speed do you have the pump set to? How long has it been running in the system? How many fish are in the system? If the fish count is really low relative to the size of the skimmer (and this is a fairly big skimmer), you won’t have enough dissolved organics (proteins) to be making as good of foam as would be ideal and instead of all the bubbles sticking together into chains that form foam and rise to the surface, some of lots of bubbles will end up escaping the skimmer through the effluent pipe. This phenomenon is common when the skimmer is oversized relative to the load.


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476

Last edited by slief; 08/17/2019 at 04:41 PM.
slief is online now   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:19 AM.


TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2019 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2014
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.