|
05/13/2020, 09:49 PM | #1 |
Registered Member
Join Date: Jul 2006
Location: Nebraska
Posts: 345
|
Tubular Steel Stand Restoration
I purchased a custom Zero Edge aquarium that came with a very sturdy 3” tubular square stand. The bad part is the bottom has some significant rust build up. I have taken the time to grind down and wire brush the rust and am now at the point where it’s bare metal. The stand has lots of rust pitting, but overall it has not affected the integrity of the stand, but simply cosmetic. I have used muratic acid and Krud Kutter rust remover, but still worried about the rust coming through a primer and paint job. Any suggestions on what precautions I should take when finishing the stand?
|
05/14/2020, 10:31 AM | #2 |
Registered Member
Join Date: Dec 2004
Location: New York
Posts: 297
|
Phosphoric acid and other products will convert rust and stop rust from progressing, Check out some of the auto restoration products for rust. Judging from the picture it needs more work before painting.
__________________
Adam Current Tank Info: 125gal |
05/14/2020, 04:29 PM | #3 |
Registered Member
Join Date: Nov 2002
Location: Miller Place, NY
Posts: 7,206
|
Agreed, need more TLC.
Not cheap but the best way would be powder coating.
__________________
250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps. |
05/15/2020, 12:40 AM | #4 | |
Registered Member
Join Date: Jul 2006
Location: Nebraska
Posts: 345
|
Quote:
Here are some updates shots from the sections I’ve been working on. |
|
05/15/2020, 12:50 AM | #5 | |
Registered Member
Join Date: Jul 2006
Location: Nebraska
Posts: 345
|
Quote:
|
|
05/15/2020, 09:53 AM | #6 |
Registered Member
Join Date: Nov 2002
Location: Miller Place, NY
Posts: 7,206
|
I know it works but you would have to speak with the person doing the job for clarification.
__________________
250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps. |
05/15/2020, 11:01 PM | #7 |
Registered Member
|
Eastwood sells some nice products for rust...
__________________
John Adams: "In my many years I have come to a conclusion that one useless man is a shame, two is a law firm, and three or more is a congress." Current Tank Info: 29g with 2 Engineer gobies |
05/16/2020, 05:02 AM | #8 |
RC Sponsor
Join Date: Nov 2001
Location: Tampa
Posts: 3,836
|
Take it to your local Linex shop.....
__________________
Rock-On! Madelyn & Jocelyn www.tbsaltwater.com Find us on Instagram tbs_liverockrocks Current Tank Info: mixed reef |
05/16/2020, 05:05 AM | #9 |
RC Sponsor
Join Date: Nov 2001
Location: Tampa
Posts: 3,836
|
Take it to your local Linex shop.....
__________________
Rock-On! Madelyn & Jocelyn www.tbsaltwater.com Find us on Instagram tbs_liverockrocks Current Tank Info: mixed reef |
05/24/2020, 12:28 PM | #10 |
Registered Member
Join Date: Dec 2005
Location: Pingree Grove, IL
Posts: 952
|
You should sandblast the stand to remove all rust. And then as above have it line-x ed. Pretty much any truck bed liner will work best.
Sent from my SM-G955U using Tapatalk
__________________
"Friendship is like peeing on yourself: everyone can see it, but only you get the warm feeling it brings" Current Tank Info: 67 Long |
05/24/2020, 08:46 PM | #11 |
Registered Member
Join Date: Jan 2005
Location: Muskogee, OK
Posts: 248
|
These are all good recommendations. I would add that anytime I need something protected from rust, I use POR15. It is sort of like a truck bed liner paint. You can buy a kit that has a degreaser, a rust converter (Metal Prep), and the POR15 paint, plus a foam brush and some gloves. I think the small kit would cover the whole stand, and still have some left over.
Some caveats: You have to paint it outside. The fumes can make you very sick. Get a small mason jar to pour the POR15 into after you open the can. Humidity “cures” it, so you only want to pour out just enough, and pour more as needed. You want to put a couple coats of the POR15 on, so you’ll need to save it at least that long. You will probably find several uses after the stand. Don’t get it on you, and if you do, wipe it off. Quickly. It stains when it dries and NOTHING will remove it except time and shedding your skin cells. It’s not UV stable, so you will want to shoot a coat of paint over it to protect it. I think that’s about it, I use it on my car and tractor and swear by the stuff. |
05/30/2020, 05:03 PM | #12 |
Registered Member
Join Date: Apr 2008
Location: SF Bay Area
Posts: 301
|
If you want it to last, I'd sandblast it, Then use a chemical that creates a sticky primed surface...it's called Ospho rust treatment, then use that POR15, they have a specific type they recommend when restoring old battery pans that rust out. It's super thick and and forms a hard shell. I used to paint a crab davit every 3-4 years using that stuff. And your stand would never have to weather the stuff my davit would....
__________________
AGE 40x28x22 tank, custom sump,Sfiligio 2x400W/2x24" Reefbrite blue, MP60wES MP40wES, ATB Elegance Pro 200, AquaCare Turbo Kalk reactor |
Thread Tools | |
|
|