|
05/04/2019, 03:47 PM | #1 |
Registered Member
Join Date: Aug 2013
Location: Largo/Bellair Florida
Posts: 1,131
|
OLD MP40 Issues
Got an older MP40 square controller and today the motor stopped spinning the controller turned red and now its just white and not doing anything and I cannot hard reset it by holding down mode and set any ideas?
__________________
Current Tank Info: 120 gallon Reef with 40 gallon refugium, (8) Bulbs 4 retro T5 , mixed reef Current Tank Info: 120 Gallon w/ 40 Gallon Refugium, 8 T5 Retro |
05/04/2019, 04:00 PM | #2 |
Cloning Around
Join Date: Jun 2000
Location: Valencia, California
Posts: 25,267
|
Did you clean the wet side? Stuff gets under the plastic beneath the impeller and can cause the impeller to stop turning (or be really, really noisy!).
Kevin
__________________
Back in the pool, swimming with the sharks... Current Tank Info: Red Sea 425XL w/Kessil AP700, Vertex 180i Skimmer, 2 x Vortech MP40s |
05/04/2019, 04:08 PM | #3 |
Registered Member
Join Date: Aug 2013
Location: Largo/Bellair Florida
Posts: 1,131
|
no the dry side not spinning at all. Just a white light from the controller.
__________________
Current Tank Info: 120 gallon Reef with 40 gallon refugium, (8) Bulbs 4 retro T5 , mixed reef Current Tank Info: 120 Gallon w/ 40 Gallon Refugium, 8 T5 Retro |
|
|